This item is eligible for free shipping
Epifanes Two-Part Polyurethanes saturated, aliphatic urethane coatings are formulated for maximum resin depth and hardness with a long lasting mirror like gloss. Epifanes polyurethane is designed for brush, roller, or spray application. Each package includes base & reactor. Thinning with Polyurethane Thinner For Brush or Polyurethane Thinner For Spray is required for application. Designed for any boat or home applications above the waterline.
- Container Size: 750 gr. (500 gr. base + 250 gr. reactor = 750 gr. mixed) 2:1 mix by weight.
- Gloss: Ultra high gloss
- Density: 1.00 - 1.40 kg./liter (mixed product) (depending on color)
- Solids Content : 50 - 55 +/- 2 vol. % (mixed product) (depending on color)
- Drying times at 65F / 65% RH: Tack free - 3 hours / Tape free - 7 hours, Hard Dry - 8 hours / Recoatable - 24 hours
- Recommended Film Thickness: Per coat wet - 80 micron / Per coat dry -40-45 microns.
- Application:
Brush - Thin 0-10 percent with Epifanes Polyurethane Brush Thinner
Spray - Thin up to 0-10 percent with Epifanes Polyurethane Spray Thinner
Technical Specifications
Temperature should be between 50 degrees F and 85 degrees F during application with the air humidity level below 85 percent. Avoid painting in too much wind or sun. A rapid loss of solvents will occur under these conditions and will decrease the flowing ability.
Reviews for Epifanes Two-Part Polyurethanes
Verified Purchase
If you want a high gloss finish that's easy to apply this polyurethane is the one. The prep is the key to a really hard cover.
Was this review helpful to you?
Verified Purchase
Good product,
Was this review helpful to you?
Verified Purchase
I used this for a swim platform. I purchased a luhrs 342 tournament the swim platform was cracked and had stains on it. I used epoxy resin for the repair and quickly discovered that gelcoat does not bond to it. After consulting Jamestown they recommended an epoxy bottom paint for a primer and eppifane Alpine white everything went well however the two part epoxy doesn't go far especially when 3 coats are required. I also applied a non skid surface to the first wet coat of polyurethane, with two coats on top of that. ( I needed 2 cans)All in all it looks great
Was this review helpful to you?
Verified Purchase
For a professional who sprays, it would be great. I opted to brush and am an amateur. I have sprayed piano finishes so am not totally inept. Trying to brush, getting the right amount of thinner, was tough, as it dries quick so consistency changed quickly making brush thinning frequent. It either ran if too thin, or sagged if thick on vertical surfaces. My end result looked very good if one stood back 10 feet or so. Up close, it looked like a brush job. The black I used on a section also bled through the blue painters tape onto the white boat color, so that made more work. Bottom line, great for a spraying pro, I would use a one part instead for a brush job.
Was this review helpful to you?
Verified Purchase
We used this along with the total boat epoxy primer to refinish a mahogany wooden soaking tub. It was easy for these amateurs to use and the tub looks and worked great. So glad we discovered it! Thank you.
Was this review helpful to you?
Verified Purchase
Great hard shell. Easy to spray
Was this review helpful to you?
Verified Purchase
I purchased Epiphanes two part poly to restore the hull of a vintage rowing craft. Though I have painted many things, this was my first time doing a fine boat hull kind of project. I was weary of using a roller to achieve a flawless surface. It turned out far better than my expectations. My friends thought I took the boat to a custom shop. Let's keep that part our secret. Jamestown was fantastic with their assistance. Next stop, boat number two.
Was this review helpful to you?
Bought this to paint a small fiberglass console and my transom. It looks great after two coats, and I didn't need to tip - just rolling is fine. However, you only get 750 ml which is both cans combined, so it's a little shocking when you open the large can of paint and see it's barely 1/2 full. In theory this covers 100sf, but I didn't come close to that.
Was this review helpful to you?
Verified Purchase
First time using this product. I rolled two coats on my boat console with great results. Looks great!
Was this review helpful to you?
Verified Purchase
Applied to our 26 year old Nimble Nomad, worked amazingly well and came out beautifully.
Was this review helpful to you?